GNET Summit System Retro Form

Name of Customer/Business*ie...Joe's Contracting or City of Orlando

Contact Name*

Contact Phone Number*Number should be formatted ###-###-####

Contact E-Mail*

Contact state/territory*Where the main office is located

What year was this system purchased? Provide original sales ID if known.On most new trucks the Sales ID is located on a plaque mounted in the operators room.

Does the system have a Video Distribution Amplifier?If there are no open video jacks on the back of the CCU a video amplifier will be needed.

YesNo

What is the K2 firmware version?K2 firmware must be R29 or newer to be compatible with GNET.

What video capture device is currently in use?*GNET is only compatible with GX168 USB Live 2 (Hauppauge) external USB device. If existing computer does not have this device, it will need to be purchased along with audio and video cables.

What computer will be used for GNET? Select from drop down menu.*

Will the customer be using a laptop for GNET?*If yes, customer will need a USB extension cable for video capture. If yes, additional USB extension cables and DP614 serial adapters will be needed for lateral and GPS. If yes, and the customer has DUC/DPM this will limit multiple monitor use and CSD should be consulted for approval.

YesNo

USB keyboard, mouse and Printer for new computer. If the existing computer has old style PS2 keyboard and mouse with the round connections and/or old style serial printer with the wide white connector they will need new devices.*Select the devices needed if getting a new computer.

Keyboard and Mouse with USB extension cables.Printer with USB cableNone - already have USB devices or will provide own equipment.Provide USB cables only

If customer has an existing CUES computer, please provide workstation number.The workstation number is also the serial number and is available on the front of the computer of on the Granite Support website.

If Customer has an existing CUES computer, please provide expiration date for software support plan.The support plan must be current to convert from Granite to GNET or update the GNET version. The date is available on the Granite Support website.

If using an existing or customer supplied computer, does it meet the minimum hardware spec?Put a check in the box to indicate compliance with spec.

Windows 7 SP1, Windows 8 or 10, (no longer supported in Windows XP)Intel core 2 Duo, Intel i5 preferred500GB or greater hard drive6-8GB RAM for Windows 7, 8, 10Available USB 3.0 or faster port (For High Definition Video Capture)

Does the customer have Sonar?*Sonar is currently supported with the Marine Electronics Pipe Profiling Sonar - 1512 Ethernet (Older USB models are not supported)

YesNo

Does the customer have a grouting system?*The GNET Grouting module is currently supported with the CUES EZ Grout system.

YesNo

Please enter any special requirements for this computer retrofit.ie...storage requirements, RAM requirements. external hard drive, GNET version

Is a blank panel needed to cover the gap when replacing an old tall (4U) computer with a new short (2U) computer?*

YesNo

Is there a new monitor included with this retro?*We need to know if it will be desk mount or rack mount. If rack mount we will need rack width and depth to verify spacing. Privide pictures.

If "Other" for monitor, please describe here

Does the customer have their old computer in or Orlando or will they be sending it to Orlando for Data Transfer? Do they want the old computer back?Additional labor and shipping charges will apply for computers sent for data transfer time.

Old computer in Orlando already for repair.Old Computer coming to OrlandoCustomer will transfer data on site.Old computer to be sent back with new computer.Old computer not needed and can be scrapped in Orlando.No old data to transfer, just getting a new computer.Other

If "Other" for the old computer, please describe here

PLEASE NOTE: Any non-CUES third party software cannot be transferred from the old computer. It will need to be re-installed by the customer.*ie...ArcGIS, Microsift office, video editing tools or IT security utilities etc.

Customer has been informed of this limitation.

Pictures of existing inspection equipment are required to verify current configuration.*Please check the boxes for the pictures provided.

Front of equipment rack.Front of computerBack of current Summit CCU showing cable connectionsBack of current computer showing all cable connections.Rear of truck showing reel and rear monitor if present.

Image UploaderTo upload multiple images, hold Cmd (Mac) or Crtl (Windows) while selecting files. Individual images MUST NOT exceed 3 MB.

GraniteNet Summit System Retro Form

Customer Information

Existing System Information

Special Module Considerations

Special Hardware and Software Considerations

Supporting Pictures